Sony STR-DA5800ES - Manual (Page 92)

92 US
Using the sleep timer
You can set the receiver to turn off
automatically at a specified time.
Press SHIFT, then press SLEEP.
Each time you press SLEEP, the display
changes cyclically as follows:
When sleep timer is being used, “SLEEP”
lights up in the display window of the receiver.
To check the remaining time before the
receiver turns off, press SLEEP. The
remaining time appears on the display
window. If you press SLEEP again, the sleep
timer is set to “OFF.”
Recording using the
receiver
You can record from a video/audio device
using the receiver. Refer to the operating
instructions supplied with your recording
equipment.
1
Select “Watch” or “Listen” from
the home menu, then press
.
2
Select the playback equipment,
then press
.
3
Prepare the equipment for
playing.
For example, insert the video tape you
want to copy into the VCR.
4
Prepare the recording
equipment.
Insert a blank video tape, etc., into the
recording equipment (VIDEO 1) for
recording.
5
Start recording on the
recording equipment, then start
the playback equipment.
Switching the command
mode of the receiver and
the remote control
You can switch the command mode
(COMMAND MODE AV1 or COMMAND
MODE AV2) of the receiver and the remote
control.
Switch the command mode from the factory
default setting to the appropriate setting, if
other Sony equipment is operated accidentally
by the same remote control, when you are
operating the receiver using the remote control
supplied with the receiver.
SLEEP
SHIFT