Sony KDX-46Q005 - Manual (Page 48)

Setting Up the TV
46
KDX-46Q005
2-592-150-12(2)
Personal Computer You can connect a personal computer to your TV to display the PC screen on
the large screen of the TV and output the sound to the TV's speakers.
Disconnect all power sources before making any connections.
Using an HD15-HD15 video cable (analog RGB), connect the VIDEO 8
(PC) IN RGB jack on the front panel of the media receiver unit to the PC's
monitor port (15-pin D-Sub). To output the PC's sound to the TV speakers,
connect the VIDEO 8 (PC) IN AUDIO jack on the media receiver unit to the
PC's audio output jack, using an audio cable with stereo mini plugs.
✍
For details on using the PC Input feature, see “Using the PC Input” on
page 81.
When connecting to an
Apple Macintosh
computer, use the
display output
connecting cord
supplied with your
Macintosh computer to
connect to the VIDEO
8 (PC) IN (RGB)
terminal of the TV. Use
an optional adapter if
necessary. If you use
an adapter, first
connect the adapter to
your computer, then
connect the D-Sub pin
signal cable.
Depending on the PC,
you may find a flicker
or noisy picture on the
screen when inputting
corresponding signal.
In that case, adjust
Phase and Pitch in the
PC Setup options.
z
z
VIDEO 8 (PC) IN
AUDIO S VIDEO VIDEO
VIDEO 2 IN
L(MONO)-AUDIO-R RGB
Front of Media Receiver Unit
HD15-HD15
video cable
(analog RGB) Audio cable
(stereo mini
plugs)
To monitor port
(15-pin D-Sub) To audio output jack