Sony KDX-46Q005 - Manual (Page 61)

Setting Up the TV
59
Se
tting
Up the
TV
KDX-46Q005
2-592-150-12(2)
Setting Up the TV Channel List
After you finish connecting the TV, you need to run the Initial Setup feature,
which automatically creates a list of available analog and digital channels.
The Initial Setup screen appears when you turn on your TV for the first time
after hooking it up. If you want to refresh the list of available channels
because there has been a change in your cable/satellite service or
connections, you can do so by selecting the Auto Program option in the
Channel menu (see page 119).
Using Initial Setup To run Initial Setup the first time you turn on your TV
1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2
Press V or v to select the on-screen display language. Then press .
The message “Start auto program now?” appears.
3
Press V or v to select “Yes”, then press .
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 119.
To add individual digital channels
❑
Use the Digital Channel feature as described on page 119.
✍
The Initial Setup feature does not apply for installations that use a
cable box for all channel selection.
✍
Auto Program may take more than 50 minutes to complete. A
progress bar is displayed while the channel list is being created.
If you are using a
CableCARD, Auto
Program is disabled for
the CABLE input.
z