Creating an image database file, On carrying, On operating temperatures – Sony DSC-RX100M3 User Manual

Page 179: On moisture condensation, On the functions available with the product

Advertising
background image

When the memory card is used in locations subject to static electricity or electrical noise.

Creating an image database file

If you insert a memory card that does not contain an image database file into the product and

turn on the power, the product automatically creates an image database file using some of

the memory card’s capacity. The process may take a long time and you cannot operate the

product until the process is completed.

If a database file error occurs, export all images to your computer using PlayMemories

Home, and then format the memory card using this product.

Do not use/store the product in the following places

In an extremely hot, cold or humid place

In places such as in a car parked in the sun, the camera body may become deformed and

this may cause a malfunction.

Storing under direct sunlight or near a heater

The camera body may become discolored or deformed, and this may cause a

malfunction.

In a location subject to rocking vibration

Near strong magnetic place

In sandy or dusty places

Be careful not to let sand or dust get into the product. This may cause the product to

malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the product in the back pocket of your trousers

or skirt, as this may cause a malfunction or damage the product.

On operating temperatures

Your product is designed for use under the temperatures between 0°C and 40 °C (32 °F and

104 °F). Shooting in extremely cold or hot places that exceed this range is not

recommended.

On moisture condensation

If the product is brought directly from a cold to a warm location, moisture may condense

inside or outside the product. This moisture condensation may cause a malfunction of the

product.

If moisture condensation occurs, turn off the product and wait about an hour for the

moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the

lens, you will be unable to record clear images.

On the functions available with the product

Advertising