Charging by connecting to a computer [9, Inserting the battery pack into the camera [10, Charging by connecting to a computer – Sony DSC-RX100M3 User Manual
Page 30: Inserting the battery pack into the camera
fully charged or close to fully charged. Doing so may cause a deterioration in battery
performance.
When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket).
Be sure to use only genuine Sony brand battery packs, micro USB cables (supplied) and
AC Adaptors (supplied).
[9] How to Use
Preparing the camera
Charging the battery pack
Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a micro
USB cable.
1. Turn off the product, and connect to the USB terminal of the computer.
Note
Note the following points when charging via a computer:
If the product is connected to a laptop computer that is not connected to a power source, the laptop
battery level decreases. Do not charge for an extended period of time.
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB
connection has been established between the computer and the camera. Doing so may cause a
malfunction. Before turning on/off or restarting the computer, or waking the computer from sleep
mode, disconnect the camera from the computer.
Proper operation cannot be guaranteed on all types of computers.
No guarantees are made for charging using a custom-built computer or a modified computer.
The camera may not operate correctly when other USB devices are used at the same time.
[10] How to Use
Preparing the camera
Charging the battery pack
Inserting the battery pack into the camera