Acesonic KOD-800 - Manual (Page 11)

9
AMPLIFIER (AC3/DTS DECODER) CONNECTION
AMPLIFIER (STEREO) CONNECTION
When you connect the player with the
following Diagram set “Digital Out” to
“ANALOG”.
-
, " " " /
When you connect the player with the following
diagram
set Digital Out to SPDIF RAW”.
- If your amplifier does not have built-in AC3/DTS
decoder, set “Digital Out” to “SPDIF/PCM”.
-You can select either Optical or Coaxial to connect the
player
.
AMPLIFIER INSTALLATION