Settings and adjustments – Acesonic KOD-800 User Manual

Page 20

Advertising
background image

18

4

)

SPEAKER SETUP

DOWN MIX:

SUBWOOFER

BASS

CENTER DELAY TIME

SURROUND DELAY TIME

LT/RT: When playing discs with PROLOGIC
Dolby stereo effects, you can select this
output mode to enjoy live sounds of which
you can hear in the theater.

STEREO: When you play 5.1 channel discs,
the left/rigth connectors projects the audio
output of the front channels. When playing
other general discs, the audio output is
stereo.

VSS: When you play 5.1 discs, this setting
will mix the surround audio outputs to front
channels to simulate the surround effects.

OFF: Select this mode in order to use 5.1-
channel amplifier.

This feature can open/close the subwoofer
outputs.

This feature can set your speaker type:
ALL LG SPK
ALL SM SPK
MIXED SPK

You can set from 0~5 ms. Each ms equals to
34 cm.

DF refers to the distance between you and
the central speaker.

CENTRAL DELAY = (DF-DC)/34

You can set from 0~15ms. Each ms equals to
34 cm. The formula of Surround Delay is the
same to that of Central Delay. This setting
gives each unit 3ms. You can get a close
figure to the delay calculation outcome.

NOTE
You have to turn off DOWNMIX mode in order
to turn on Center Delay and Surround Delay.

5)

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

L+R

LINE OUT: Compresses the output signal.
RF REMOD: Output signal is not
compressed.

If the output mode is set to
“Line OUTPUT”, you can adjust the
compression rate to get the best sound
effects.

This will only work with mix mode when you
play 5.1 channel DVD discs.

NOTE
You can only set the player to Digital
Output when playing 5.1 channel DVD
discs. Karaoke mode not supported.

SETTINGS AND ADJUSTMENTS

Advertising