Acesonic KOD-800 - Manual (Page 29)

Please refer to the following methods to
detect the problem if any functions fail to
perform properly.
Ensure that the equipment is connected
properly.
Ensure that the input settings and the volume
adjustment for the TV are correct.
Ensure that the input settings and the volume
adjustment for the receiver are correct.
Ensure that the input setting for the TV is
correct.
Ensure machine music volume is up.
Ensure that the equipment is connected
properly.
Ensure the TV is properly set on a correct
mode.
Ensure that the input setting for the TV is
correct.
Ensure that the equipment is connected
properly.
Ensure that the connection to the YUV jack is
set properly.
Ensure that the output setting is correct.
Select only one output connection, either S-
Video or YUV.
Ensure that the connection cord is in good
condition.
Ensure that the disc tray is empty.
Ensure that the selected song is recorded in
the H.D.D.
Please check if you have deleted this song.
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
NO SOUND
NO PICTURE
DISTORTED SOUND
DISTORTED PICTURE
SELECTED SONG WON’T PLAY
Ensure that the equipment is connected
properly.
Ensure that the input settings and the
volume adjustment for the TV and
receiver are correct.
NO POWER
DISC WON’T PLAY
NO MICROPHONE SOUND
REMOTE WON’T WORK
BLUE SCREEN WITH DVD LOGO
AFTER MACHINE BOOT UP
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Д
Make sure both ends of the AC power cord
are securely plugged into the DVD player
and into the wall outlet.
Ensure that the power switch on the back
panel is turned on.
Insert a disc with label side facing up.
If the laser reader is dirty, use a lense
clean disc.
Please check if the disc surface is dirty.
Wipe the disc with a cleaning cloth.
Ensure that microphone is connected
properly.
Ensure that the microphone power is
turned on.
Turn the volume control knob on the front
panel clockwise.
Adjust the microphone volume with the
remote control.
Remove any obstacles between the
remote and the DVD player.
Operate the remote control close to the
DVD player and point directly to the
sensor.
Please check if the batteries in the remote
need replacement.
H.D.D might be damage or song data base
has been messed up due to
unappropriated operating. Please contact
manufacture.
27
TROUBLE SHOOTING