Acesonic KOD-800 - Manual (Page 13)

11
PAUSE
DISPLAY
VOLUME CONTROL
1 Press to pause playback press it
again to resume the playback.
2)If a CD is set on pause mode over 20
minutes, the player automatically stops
the disc playback. In order to resume the
Playback, press the PLAY button.
When playing a disc, press button to
show the playback mode on the screen.
Press it again to cancel the display.
Use the volume knob on the amplifier or on
the TV to adjust audio volume. Press the +
button to increase the volume or - button to
decrease the volume.
) ;
PLAYING DISCS
1) Connect the power cord into the player and
power outlet.
2) Switch the power button on the rear panel
to the “ON” position.
3) Press the power button on the front panel
to turn on the player.
It takes about 1-2 minutes to load the song
database before the machine is ready to use
4) Press on the front panel to open the disc
tray.
5) Place a disc on the disc tray with the disc’s l
label side facing up.
6) Press on the front panel to start
Playback.
7) Press to end the playback.
8) Remove the disc and turn off the power.
Note:
Press
twice to stop playback while playing a
DVD disc.
Switch the color system (NTSC/PAL) according
to your TV.
If the color system of the TV is NTSC, press the
button to set the player to “NTSC”. If it is
PAL, set the color system to “PAL”. If your TV
complies with both NTSC and PAL color
system, set your TV to “AUTO”.
COLOR TV SETUP
BASIC OPERATION