AVerMedia Technologies NV 6000 EXP - Manual (Page 57)

Chapter 5 Customizing NV DVR System
48
(5) Port Setting : Select the Local or Remote port to where it is connected.
Local - select the COM port number which is connected.
Remote
– Use the UDP protocol for remote connection if POS
system can broadcast to Internet. Enter the IP
address of the remote station.
(6) Map to Channel : Select to which camera number to display the transaction text.
(7) Text Filter :
Enter the word you want to be removed.
5.2 Camera Setting
In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit
without saving, and click Default1/ Default2 to revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras,
enable the ALL check box. To select more than one camera, Right click on the camera icon.
To select one camera only, Left click on the camera icon. The camera icon turns red when it
is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we
suggest disabling it so that the system won’t detect it as video loss error.