AVerMedia Technologies NV 6000 EXP - Manual (Page 69)

Chapter 5 Customizing NV DVR System
60
9. In CD/DVD Backup, enable/disable Delete file after burning check box to remove the
archived file after burning. Click Burn to start and Exit to cancel this process.
5.7 Sensor Setting
The I/O device must be installed to use this function. The NV DVR
system also support external I/O box and user can install external
sensors. For external sensor setting, please referring to the sensor
vendor user’s manual.
To Set the Sensor Setting:
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name.
3. The system automatically detects the card and input number. In the
Content section, enter sensor description.
4. In the test section, click Test to check the sensor status. Red is
high and Green is low.
5. Click
OK
to exit and accept the setting and Cancel to exit without saving the setting.
5.8 Relay Setting
The I/O device must be installed to use this function.
To set the Relay Setting:
1. Click the drop-down list and select the relay ID number.
2. Enter relay name.
3. The system automatically detects the card and input number. In the
Content section, enter relay description.
4. In the test section, click Test to trigger relay. Red is high and Green
is low.
5. Click
OK
to exit and accept the setting and Cancel to exit without
saving the setting.