AT&T P5962 - Manual (Page 10)

8
Getting Started
LOW
BATTERY
Battery & charger installation
Installation of Battery Pack in Handset
Follow the steps below:
1. Remove the battery compartment cover by pressing on the indentation and sliding
downward. Place the new battery pack in the handset with the positive and negative
poles aligned in the battery compartment.
2. Replace the battery cover by sliding it upwards.
3. Place the handset in its charger, and allow it to charge for at least 10-12 hours. After ini-
tial charge, a maintenance charge of 8 hours should be sufficient.
VO LU ME SPEAK ER
Insert supplied
battery.
Place handset in
charger for 12 hours
before first use.
Caution: Use only supplied
rechargeable battery (model
102) or AT&T replacement bat-
tery model 103.
DID YOU KNOW?
An optional spare battery pack can be kept charged in
the base for quick replacement when a handset battery
becomes depleted and for power failure operation (see
page 44).
Plug power cord into jack
on underside of charger,
then plug A.C. plug into
electrical outlet.
Charging of the Handset Battery Pack
The cordless handset is powered by a rechargeable battery pack. It charges automatically
whenever the handset is in its charger. You should charge the battery pack for at least 10-12
hours when you first receive your phone. Average talk time on a fully charged battery is
about 8 hours depending on environmental conditions. The battery charge will last for about
4.5 days if you don't use the phone.
You will know the battery pack needs charging when :
• The low battery message is displayed.
OR
• The handset seems completely dead, the LCD is completely clear and does not
respond when you press the keys.
91-000302-050-000_EP5962Englishmanual_Sep.02,2005.qxd 2/13/1950 7:21 PM Page 8