Avocent CPS1610 CPS - Manual (Page 54)

48 CPS Installer/User Guide
In the following example, there are spaces between BAUD, the equal sign and
the value 57600. Spaces are not permitted between keyword parameters and
their values.
> POR 2 SET BAUD = 57600 FLOW=XON
------------
ERR 26 - SET keyword parameter invalid
Syntax conventions
This manual uses the following command syntax conventions:
• Brackets [ ] surround optional keywords and values.
• Angle brackets < > surround user-supplied positional parameters and
keyword parameter values.
• In most cases, choices are separated by a vertical bar |. The description
indicates if you may specify more than one of the choices and how to
separate multiple values. The exception is the Server SSH command. In
this case, the vertical bar is specifi ed on the command line when you
want to enable the “password or key” method (PW|KEY) or the “key or
password” method (KEY|PW).
Command Summary
The following table lists the CPS commands, including a brief description plus
the required access rights and level.
CPS Command Summary
Command Description, Access Right and Access Level *
Connect Accesses devices from the serial CLI port.
Access right: port-specifi c; Access level: A and AA **
Disconnect Ends a device session initiated with Connect command.
Access right: port-specifi c; Access level: A and AA **
Help Displays information about commands.
Access right: none needed; Access level: all
Port Alert Add Adds a port alert string.
Access right: SCON or PCON; Access level: A and AA
Port Alert Copy Copies a port’s alert strings to another port.
Access right: SCON or PCON; Access level: A and AA
Port Alert Delete Deletes one or more port alert strings.
Access right: SCON or PCON; Access level: A and AA
Port Break Sends a break signal to the attached device.
Access right: BREAK; Access level: A and AA
Port History Accesses the port history buffer.
Access right: none needed; Access level: all