Avocent CPS1610 CPS - Manual (Page 76)

70 CPS Installer/User Guide
server snmp trap enable
Traps now disabled:
1)
linkUp 4) userLogin
2) userAdded 5) imageUpgradeStarted
3) userDeleted
Select trap(s) to enable>1,3-4
Server SNMP Trap Destination command
The Server SNMP Trap Destination command defines or deletes destinations
for enabled SNMP traps. Once you define destinations for enabled SNMP traps,
when a trap occurs, the CPS will generate SNMP trap messages to each defined
SNMP trap destination. You may define up to four trap destinations, using
separate commands.
For more information, see Managing SNMP Structures in Chapter 3.
Access right: SCON; Access level: AA
Syntax
SERVER SNMP TRAP DESTINATION ADD|DELETE <ip_address>
Server SNMP Trap Destination Command Parameters
Parameter Description
ADD|DELETE Defi nes or deletes the specifi ed destination.
<ip_address> IP address of trap destination.
Server SSH command
The Server SSH command enables or disables SSH session access to the CPS and
specifies the SSH authentication method. When you enable SSH, all CPS sessions
will be terminated.
For more information, see Connecting to devices using SSH in Chapter 3.
Access right: SCON; Access level: AA
Syntax
SERVER SSH ENABLE|DISABLE [AUTH=<auth>]