Avocent CPS1610 CPS - Manual (Page 74)

68 CPS Installer/User Guide
Server SNMP Community command
The Server SNMP Community command defines read, write and trap SNMP
community strings. Community names are case-sensitive.
For more information, see Managing SNMP Structures in Chapter 3.
Access right: SCON; Access level: AA
Syntax
SERVER SNMP COMMUNITY [READCOMM=<name>]
[WRITECOMM=<name>] [TRAPCOMM=<name>]
Server SNMP Community Command Parameters
Parameter Description
READCOMM= < name > 1-64 alphanumeric character read community name.
Default = public
WRITECOMM =< name > 1-64 alphanumeric character write community name.
Default = public
TRAPCOMM= < name > 1-64 alphanumeric character trap community name. If you
specify this parameter, the name must be different from the
read and write community names.
Default = public
Server SNMP Manager command
The Server SNMP Manager command defines or deletes SNMP management
entities. You may define up to four management entities. If you delete all
SNMP managers (or never add any), the CPS can be accessed via SNMP from
any IP address.
For more information, see Managing SNMP Structures in Chapter 3.
Access right: SCON; Access level: AA
Syntax
SERVER SNMP MANAGER ADD|DELETE <ip_address>
Server SNMP Manager Command Parameters
Parameter Description
ADD|DELETE Adds or deletes the specifi ed SNMP management entity.
<ip_address> IP address of SNMP management entity.