Important safety precautions – Antares TASCAM TA-1VP User Manual

Page 2

Advertising
background image

2

TASCAM TA-1VP

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

ª

TO THE USER
This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in

a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION
Changes or modifications to this equipment not expressly

approved by TEAC CORPORATION for compliance could

void the user's authority to operate this equipment.

For European Customers

ª

CE Marking Information
a) Applicable electromagnetic environment: E4

b) Peak inrush current: 5 A

Disposal of electrical and electronic equipment
(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste

stream via collection facilities designated by the

government or local authorities.

(b) By disposing of electrical and electronic equipment

correctly, you will help save valuable resources and

prevent any potential negative effects on human

health and the environment.

(c) Improper disposal of waste electrical and electronic

equipment can have serious effects on the

environment and human health because of the

presence of hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment (WEEE)

symbol, which shows a wheeled bin that has been

crossed out, indicates that electrical and electronic

equipment must be collected and disposed of

separately from household waste.

(e) Return and collection systems are available to end

users. For more detailed information about the

disposal of old electrical and electronic equipment,

please contact your city office, waste disposal service

or the shop where you purchased the equipment.

This appliance has a serial number located on the

bottom panel. Please record the model number and

serial number and retain them for your records.

Model number ______________________________

Serial number ______________________________

IMPORTANT SAFETY PRECAUTIONS

Advertising