Aussie MECO 7110 - Manual (Page 10)

10
(27) BOLT, M6X15
8 PC
(28) SCREW, M6X15
FIG. 6A
FIG. 6B
(27) BOLT, M6X15
(26) LEFT SIDE
TABLE
(25) RIGHT SIDE
TABLE
Step 6) Assemble Side Tables:
Align bracket holes of Left and Right Side Tables with holes in Bowl Leg Brackets. Attach Side
Tables with M6 x 15 Bolts underneath. (FIG. 6A 7 6B)
(33) HANDLE SPACER
(TAPERED)
2 PC
FIG. 7
Step 7) Attach Deco Bar and Hood Handle:
Open Hood. Attach Deco Bar and Heat Shield with M6 x 30 Bolts through the Heat Shield and
Hood. Do not tighten completely. Attach Hood Handle, Tapered Spacer and Fitted Spacer to Hood
with M6 x 60 Bolts through the Heat Shield and Hood. Tighten all bolts. Make sure Handle
Spacers fit to the Hood Handle.
(34) HANDLE
SPACER
1 PC
(32) Bolt, M6x60mm
2 PC
(33) HANDLE SPACER
(TAPERED)
(35) HOOD HANDLE
(34) HANDLE
SPACER
(FITTED)
(32) BOLT, M6x60mm
(31) Deco Bar
1 PC
(28) Bolt, M6x30mm
2 PC
(30) Spacer
(Deco Bar)
2 PC
(29) Heat Shield
1 PC
(31) DECO BAR
(29) Heat Shield
(30) Spacer
(Deco Bar)
(35) HOOD HANDLE
1 PC
(28) BOLT,
M6x30mm