Aussie MECO 7110 - Manual (Page 7)

STEP 2) Assemble Axle, Wheels & Wheel Covers:
7
(10) WHEEL
2 PC
(12) WHEEL COVER
2 PC
Push Axle through center hole in Wheel and through lower hole in each leg. (FIG. 2A) Insert Axle
pin through small hole in end of Axle until it snaps over it. (FIG. 2B) Align Wheel Cover pins with
3-holes in Wheel and push flush against Wheel.
(10) WHEEL
(12) WHEEL
COVER
(9) AXLE
WHEEL LEGS
FIG. 2A
(11) AXLE PIN
2 PC
FIG. 2B
(9) AXLE
1 PC
(11) AXLE PIN