Panasonic KYB64BXBXD - Manual (Page 15)

28 29
Pan-frying menu
Deep-frying menu
Symptom Probable cause
- Preheating time
takes too long.
- The actual
temperature is
different from the set
temperature.
- The pan has been moved away from the IR sensor.
- The pan bottom or top plate is stained.
- Water, oil, or food was added during preheating.
- The temperature on the bottom of the pan may vary from
the set temperature depending on the type of pan.
* If the actual temperature is incorrect adjust the
temperature with . (See page 20.)
Symptom Probable cause
- Preheating time
takes too long.
- The actual
temperature is
different from the set
temperature.
- The pot has been moved away from the IR sensor.
- The pot bottom or top plate is stained.
- More than 800 g of oil has been added.
- Hot oil, brown-coloured oil, murky oil, or oil filled with food
sediment is used.
- The oil temperature may vary from the set temperature
or the preheating time may take longer depending on the
type, material, and shape and size of the bottom of the pot.
* If the actual oil temperature is incorrect adjust the
temperature with . (See page 21.)
Troubleshooting
For the following error indications, check the
cause and deal with it.
Heating automatically resumes after the cause
are eliminated.
Indication Probable cause
The indicator illuminates or flashes
- In case of left or right front
IH heater
- In case of left or right rear
IH heater
Operation keys error
detection
- There is water or foreign objects on or around
the operation panel, or water or ingredients have
boiled over.
Remove water or foreign objects. (If the
IH heater was turned off, perform the key
operation again.)
- The top plate has been touched for 3 seconds
or more. (Except operations which keys must be
touched and held for 3 seconds or more, such as
rapid change of timer)
The indicator flashes.
Undetected pot auto shutoff
Small object auto shutoff
- No pot placed on the IH heater.
- The pot being heated has been removed.
- The pot is not centred on the IH heater.
- An incompatible pot is used. (See page 16.)
- A metal kitchen tool, such as a knife or a spoon, is
on the top plate.
If they are not removed, the display goes out after a
minute then the main power turns off.
* The IR sensor may malfunction in a very bright
environment, and may not flash even though no
pot is placed on the IH heater.
Turn off the IH heater, and then turn it on again.
Error Indications
English