Avaya 16-300310 - Manual (Page 6)

Configuration of SIP video endpoints on Communication Manager 6.0
AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 6
3 Enabling video for the SIP signaling group
1. On System Manager, click Elements > Feature Management > Network -
Signaling Groups.
2. On the Signaling Groups page, click the arrow icon next to the Select
Device(s) from Communication Manager List.
3. From the Communication Manager list, select the appropriate Communication
Manager, and click Show List.
4. Select the appropriate Signaling Group Number and click edit to set
parameters as mentioned below:
●
IP Video : y
●
Direct IP-IP Audio connections : y
●
Initial IP-IP Direct Media : y
Alternatively:
On the Communication Manager SAT screen, enter change signaling-group
n and set parameters as mentioned below:
●
IP Video : y
●
Direct IP-IP Audio connections : y
●
Initial IP-IP Direct Media : y
Note:
Note:
Modifying the default Priority video option is not necessary. See
Avaya video conferencing Solutions Networking Guide 6.0 for further
details.
Table 1: Enabling video on Communication Manager