A&D Check Weighing Scales FS-6Ki - Manual (Page 27)

25
11-2. Function list
Item Function number Description
Š f 1- 0 Auto power-off disabled Auto power-off
function
f 1- 1 Auto power-off enabled
Automatically
power off
Š f 2- 0 Normal (1/3,000 class)
f 2- 1 High (1/6,000~1/7,500 class)
Display
resolution
f 2- 2 Higher (1/12,000~1/15,000 class)
Legal for trade is
Normal only.
f 3- 0 kg
f 3- 1 g
Š f 3- 2 lb
f 3- 3 oz
Weighing unit
when powered
on
f 3- 4
lb-oz
Factory setting
may be different
depending on the
area to be
shipped.
Š f 4- 0 2400 bps
f 4- 1
4800 bps
Serial interface
Baud rate
f 4- 2
9600 bps
Optional RS-
232C/422/485
Š f 5- 0 7 bit / Even parity
f 5- 1
7 bit / Odd parity
Serial interface
Data bit / Parity
f 5- 2
8 bit / Non parity
Optional RS-
232C/422/485
f 6- 0
Stream mode
f 6- 1
Command mode
Š f 6- 2 Print key mode
f 6- 3 Auto-print mode + data
Serial interface
Data output
mode
f 6- 4 Auto-print mode +/- data
Optional RS-
232C/422/485.
The UFC format
is applicable to
f6-2 to 4.
f 7- 0
Upper & Lower limits weight setting
mode
Š f 7- 1
Target weight setting mode with
HI/LO limit weight
Comparison
mode
f 7- 2
Target weight setting mode with
HI/LO limit % of the target weight
Way to set
parameters.
f 8- 0
Comparator disabled
Š f 8- 1 Compares all data
f 8- 2
Compares all stable data
f 8- 3
Compares data > +4d or < -4d
f 8- 4
Compares stable data > +4d or < -4d
f 8- 5
Compares data > +4d
Comparator
operating
condition
f 8- 6
Compares stable data > +4d
Conditions to
compare.
d = minimum
display division
Š f 9- 0 Buzzer does not sound.
f 9- 1 Buzzer sounds at LO
f 9- 2 Buzzer sounds at OK
f 9- 3 Buzzer sounds at LO and OK
f 9- 4 Buzzer sounds at HI
f 9- 5 Buzzer sounds at LO and HI
f 9- 6 Buzzer sounds at OK and HI
Comparator
buzzer
f 9- 7 Buzzer sounds at LO, OK and HI
Buzzer sounds
according to
the comparator
results
f10- 0
Š f10- 1
f10- 2
f10- 3
Response /
Filtering
f10- 4
Fast / Weak (sensitive)
Slow / Strong (stable)
Software
filtering
Š Factory setting