Appliances – Airstream INTERNATIONAL CCD User Manual

Page 94

Advertising
background image

H

APPLIANCES

H - 5

HIGH VOLUME ROOF VENT

Manufacturer:

FAN-TASTIC VENT CORP.

2083 S. Almont Ave. Imlay City, MI 48444

1-313-742-0330

1-800-521-0298

The optional High-volume roof vent system is designed to quickly exhaust stale, hot air

and draw in fresh air. It’s great to use when the outside temperature really doesn’t call

for air conditioning, but heat has built up in your coach.

OPERATING INSTRUCTIONS:

1) Open dome approx. 3” or more (ceiling fan has a built in safety switch that will not

allow motor to operate unless dome is partially open).

2) Turn 3- speed knob to desired performance lever (3-Low, 2-Medium, 1-High, O-Off)

3) Open a window or door for airflow,

4) Source of airflow is determined by the window(s) or door(s) opened. For best results,

close all roof vents and open 1 (one) window the greatest distance from your Fan-

Tastic Vent ceiling fan,

CAUTION

: Never place Lindeen™ or a like cover over ceiling fan. Greatly re-

stricted airflow & increased sound levels will occur.

WHEN EQUIPPED WITH REVERSE SWITCH

1) Turn fan motor off by:

a) Setting 3-speed switch to “O” - OFF. b) Closing Dome.

c) Selecting center position on IN/OUT rocker switch

2) Wait for fan blade to stop.

3) Select IN position brings air from the roof area into your coach

(pressurizes inside).

4) Or select OUT position, brings air in through any or all openings in coach

and exhausts through the roof.

5) Turn fan motor On.

WHEN EQUIPPED WITH THERMOSTAT:

1) Follow “Operating Instructions: 1 thru 4

2) Select desired temperature or comfort level on thermostat. Fan motor will

now start & stop automatically as interior temperature of coach exceeds or

drops below selected level.

NOTE: Fan motor will not start if temperature selected is warmer than interior

temperature of coach.

CLEANING INSTRUCTIONS:

1) Turn fan motor Off.

2) Remove 8 painted flat head Phillips screws around perimeter of screen

insert only.

3) Clean screen with soap & water solution, dry, and reinstall.

Advertising