AMX NetLinx NXM Series - Manual (Page 25)

NXC-IRS4 4-Port IR/S Control Card
19 NetLinx Cardframe, Control Cards, and NetModules
NXC-IRS4 4-Port IR/S Control Card
The NXC-IRS4 4-Port IR/S Control Card (FG2023) provides four IR/Serial input control ports with LED
status feedback. Each port in the NXC-IRS4 stores programmed commands for IR- or serial-controlled
devices. FIG. 5 shows the IRS4 card.
Specifications
FIG. 5 NXC-IRS4 4-Port IR/Serial Control card
NXC-IRS4 Specifications
Power Requirements 110 mA @ 12 VDC
Power +12 VDC power for sensors
Operation:
IR 1-4 4 IR/Serial control ports
Input 1-4 4 input ports for closure or 0-5 VDC sensing, 200 mA
Memory 32K of IR memory shared between four ports.
IR Frequency range Support of high-frequency carriers up to 1.14 MHz.
Status LEDs:
(2 LEDs per channel)
LEDs light to indicate
ON status Red LED shows IR transmission activity/Yellow LED shows input status activity:
LED 1: Channel 1 Input (yellow)
LED 2: Channel 1 IR Out (red)
LED 3: Channel 2 Input (yellow)
LED 4: Channel 2 IR Out (red)
LED 5: Channel 3 Input (yellow)
LED 6: Channel 3 IR Out (red)
LED 7: Channel 4 Input (yellow)
LED 8: Channel 4 IR Out (red)
Connections/wiring • Two 2-pin 3.5 mm captive-screw terminals
• Two CC-NIRC IR Emitters