Nxc-rel10 connections/wiring – AMX NetLinx NXM Series User Manual
Page 34
Advertising
NXC-REL10 Relay Control Card
28
NetLinx Cardframe, Control Cards, and NetModules
NXC-REL10 Connections/Wiring
The NXC-REL10 Control Card has 10 relays that are independently controlled and electrically isolated. The
relay contacts are rated for a maximum of 1 A @ 0-24 VAC or 0-28 VDC (resistive). Jumpers located on the
Card allow you to select Normally Open (NO) or Normally Closed (NC) contact settings:
Normally open (NO) mode setting on jumper pins 1 and 2 (default).
Normally closed (NC) mode setting on jumper pins 2 and 3.
Advertising