Panasonic SCAK331 - Manual (Page 22)

RQT7799
6
POWER
Disc information
Disc selection MP3 information
Do not:
• use irregularly shaped discs.
• attach extra labels and stickers.
• use discs with labels and stickers that are
coming off or with adhesive exuding from
under labels and stickers.
• attach scratch proof covers or any other kind of accessory.
• write anything on the disc.
• clean discs with liquids. (Wipe with a soft, dry cloth.)
• use discs printed with label printers available on the market.
Always observe the following points:
• Load only 1 disc on the tray.
• Always stop the changer before loading or changing discs. Do not
change discs while a disc is playing.
• Set the system on a flat, level surface.
• Always unload all discs before moving the unit.
Do not:
• set the unit on top of magazines, inclined surfaces, etc.
• move the unit while a tray is opening/closing, or when loaded.
• put anything except a disc in the tray.
• use cleaning discs or discs which are badly warped or cracked.
• disconnect the AC power supply cord from the household AC outlet
during disc changing operation.
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as albums.
This unit can access up to 999 tracks, 255 albums and 20 sessions.
When making MP3 files to play on this unit
Disc format
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
File format
MP3 files must have the extension “.MP3” or “.mp3”.
To play in a certain order
Prefix the folder and file names with 3-digit
numbers in the order you want to play them.
Files may not be recorded in numbered order if
the prefixes have different numbers of digits.
For example: 1track.mp3, 2track.mp3,
10track.mp3.
However, some writing software may also
cause recording to occur in a different order.
Limitations on MP3 play
• This unit is not compatible with packet-write format.
• When both MP3 and CD-DA data is recorded on the disc over a
number of sessions:
• If the first session contains MP3 recordings, the unit will play
from the MP3 made in that session till the session before the first
CD-DA recordings.
• If the first session contains CD-DA recordings, the unit will play
only the recordings made in that session. The subsequent
sessions will be ignored.
• Some MP3 may not be played due to the condition of the disc or
recording.
• Recordings will not necessarily be played in the order you recorded
them.
• Lower case letters will be displayed as upper case.
This unit can play MP3 and CD-DA (digital audio) format audio
CD-R and CD-RW that have been finalized (a process that enables
CD-R/CD-RW players to play audio CD-R and CD-RW) upon
completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
Discs
Basic play
CD MP3
root
001
002
003
001.mp3
002.mp3
003.mp3
001.mp3
002.mp3
003.mp3
004.mp3
001.mp3
002.mp3
003.mp3
Example:
xx xx xx
xxx xx xx xx xx xx x xx xx xx xxx xx xx xx xx xx xx xx xxx xx xxx xx x XXXX XXXX XXXXX XXXX XX XXXX XXXX XXXXX XXXX XXXX XXXXX XXXX XXXX
MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson
multimedia.
Stop
[:/J, CD]
Pause
3 Press [1]–[5] to play the disc.
You can also press [:/J, CD] if the
current disc is your desired disc.
[1]–[5]
Current disc indicator
Press [:/J, CD] during play.
Press again to resume play.
1 Press [c, OPEN/CLOSE] to open
the tray.
The unit comes on.
Load discs with label facing up.
To load discs in other trays, press [1]–[5]
to select the tray, then press [c, OPEN/CLOSE].
2 Press [c, OPEN/CLOSE] to close the tray.
To prevent damage
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifications of the Compact Disc Digital Audio (CD-DA) format so
play may not be possible.
Press [L, STOP] during play.
MP3 Display when in the stop mode
(example):
“MP3”: Indicates the disc contains MP3
files
Skip/Search
Press [g/REW/ 3] or [f/FF/4]
to skip.
MP3 Display when skipping in stop mode
(example):
Current track
Current album
• During random play (A page 7), you
cannot skip to tracks already played.
Hold down during play or pause
to search.
• During program play (A page 8), or
random play (A page 7), you can search
only within the track.
CD
Total number
of albums Total number
of tracks
Audio CD
CD
CD-R/RW — CD MP3
Disc type
Logo
Indication used
in instructions
(Depending on the
recording format A see above)