Using wireless remote controller (continued) – Panasonic 26PST1U6 User Manual
Page 17
17
USING WIRELESS REMOTE CONTROLLER (CONTINUED)
How to Use Wireless
Remote Controller
When using the wireless remote controller, always point the unit’s transmitter head directly at
the air conditioner’s receiver.
Wireless Remote
Controller Installation
Position
The wireless remote controller can be operated from either a non-fixed position or a wall-
mounted position. To ensure that the air conditioner operates correctly, do not install the
wireless remote controller in the following places:
•
In direct sunlight
•
Behind a curtain or other place where it is covered
•
More than 19 ft away from the air conditioner
•
In the path of the air conditioner’s air stream
•
Where it may become extremely hot or cold
•
Where it may be subject to electrical or magnetic interference
1. If Non-fixed Position
Raise the rear plate of the remote controller mounting cradle and insert the wireless remote
controller.
The unit can be used either in that position (placed on a table, for instance) or held in the
hand.
2. If Wall-mounted Fixed Position
Install the wireless remote controller at a convenient location on a nearby wall. However,
before attaching the wireless remote controller mounting cradle, check that the wireless
remote controller can operate from the desired wall position.
Air conditioner
(Transmitter head)
Wireless remote controller
Remote control receiver
Wireless Remote
Controller
Remote Controller
mounting cradle
Rear plate
1
2
Press
Put in
Fasten the Remote Controller
mounting cradle with screws.
Remote Controller mounting cradle
Fitting the Remote
Controller in the mount.
163011_SingleSplit_EN_2.fm Page 17 Thursday, September 15, 2011 9:03 AM