Operation without wireless remote controller – Panasonic 26PST1U6 User Manual
Page 24
24
OPERATION WITHOUT WIRELESS
REMOTE CONTROLLER
If you have lost the wireless remote controller or if it is not working properly, follow the steps below:
STEP 1
To start the air conditioner
Press the ON/OFF operation button (automatically setting cooling or heating operation).
STEP 2
Setting the airflow direction
To adjust the airflow direction, press the SWEEP button as appropriate. You can only set the airflow for all four
sides in the same direction, or have each sweep.
STEP 3
To stop the air conditioner
Press the ON/OFF operation button again.
STEP 1
To start the air conditioner
Operate the receiver switch in the following
sequence:
ON
OFF
ON
(automatically setting auto operation).
STEP 2
To stop the air conditioner
Then turn the switch to OFF.
STEP 2
STEP 1,3
163011_SingleSplit_EN_2.fm Page 24 Thursday, September 15, 2011 9:03 AM