Panasonic SC-HTB770S - Manual (Page 19)

Getting started
RQT9778 19
≥For a safety measure to prevent the speakers from falling, refer to page 24.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers
horizontally” (> 12, 13).
Attach the leg stands.
≥ Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speakers using the leg stands
∏ 2 Front
speakers
∏ 1 Center speaker ∏ 3 Speaker cables
WHITE: Left
RED: Right
GREEN: Center
∏ 1 Metal
bracket
∏ 2 Leg stands ∏ 6 Screws
Red connector:
With the speaker facing down, the speaker attached to the red connector cable is
to be placed on the left side.
White connector:
With the speaker facing down, the speaker attached to the white connector cable is
to be placed on the right side.
A Screw (supplied)
≥ Tighten securely.
B Screw hole
C Right speaker connector
D Left speaker connector
 



Align the higher or lower holes with the projecting parts on the
speaker.
≥ By changing the position that the stand is attached to the
projecting parts, the height can be adjusted by 9 mm ( 11 /
32
q).
Red
White
SC-HTB770PPC_RQT9778-1P_mst.book Page 19 Tuesday, January 29, 2013 11:33 AM