Panasonic SC-HTB770S - Manual (Page 29)

Getting started
RQT9778 29
Preparation
≥ Turn on the main unit.
Press [BÍ CI].
Active subwoofer on/off button [B Í C I]
Use this button to turn the active subwoofer on and
off.
C I:
The active subwoofer is on.
B Í:
The active subwoofer is off.
The active subwoofer will still consume a small
amount of power even when it is turned off (B, Í).
Check that the wireless link is
activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights green:
The wireless link is activated.
Blinks green:
The active subwoofer is trying to activate the
wireless link with the main unit.
The wireless link will be activated when the main unit and the
active subwoofer are both turned on.
By using the Bluetooth ® connection, you can listen
to the sound from the Bluetooth ® audio device
from this system wirelessly.
Preparation
≥ Turn on the Bluetooth ® feature of the device and
place the device near the main unit.
Press [ ] to select “ ”.
≥ If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ”
indicator flashes quickly.
≥ If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB770” from the
Bluetooth ® device’s Bluetooth ®
menu.
≥ If prompted for the passkey on the Bluetooth ® device, enter
“0000”.
≥ Once the Bluetooth ® device is connected, the “ ” indicator
stops flashing and lights up.
Press [ ] to select “ ”.
≥ If the “ ” indicator lights, a Bluetooth ® device is already
connected with this system. Disconnect it. (> below)
Select “SC-HTB770” from the
Bluetooth ® device’s Bluetooth ®
menu.
∫ Disconnecting a Bluetooth ® device
Press and hold [ ] until the “ ” indicator flashes
slowly.
≥ When “ ” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth
® device.
≥ The Bluetooth ® device will be disconnected if a different
audio source (e.g. “TV“) is selected.
≥ Refer to the operating instructions of the Bluetooth ® device
for further instruction on how to connect a Bluetooth ®
device.
≥ This system can only be connected to one device at a time.
≥ You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
≥ To change the sound quality, refer to “Bluetooth ®
communication mode” on page 34.
Active subwoofer wireless
connection
Bluetooth ® connection
Bluetooth ® pairing
Connecting a Bluetooth ®
device
SC-HTB770PPC_RQT9778-1P_mst.book Page 29 Tuesday, January 29, 2013 11:33 AM