Panasonic SC-HTB770S - Manual (Page 25)

Getting started
RQT9778 25
When attaching the speakers vertically
A Cord §1, 2
B Screw eye
C Wall
D Approx. 150 mm (5
29 /
32
q)
§1 If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 10 mm ( 13 /
32
q) apart from the tip, at an angle of 45 o (as illustrated above).
§2 When attaching the cord to the center speaker, make sure that the cord does not touch the speaker
cable lead wire.









Wall mounting







On a table
SC-HTB770PPC_RQT9778-1P_mst.book Page 25 Tuesday, January 29, 2013 11:33 AM