Panasonic SC-HTB770S - Manual (Page 7)

Before use
RQT9778 7
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the volume of this system
3 Select the input source
“TV”
---------#“BD/DVD”---------#“AUX1”
^-- “ ”(- “AUX3”(- “AUX2”(}
4 Input selector indicators §1
A Bluetooth ® indicator
Lights blue when the Bluetooth ® device is
the audio source
B TV indicator
Lights green when the TV is the audio
source
C BD/DVD indicator
Lights amber when the device connected
to the BD/DVD terminal is the audio
source
D AUX1 indicator
Lights amber when the device connected
to the AUX1 terminal is the audio source
E AUX2 indicator
Lights amber when the device connected
to the AUX2 terminal is the audio source
F AUX3 indicator
Lights amber when the device connected
to the AUX3 terminal is the audio source
5 Sound mode indicators §1
G STANDARD indicator
Lights when STANDARD is the current
sound mode
H STADIUM indicator §2
Lights when STADIUM is the current
sound mode
I MUSIC indicator §2
Lights when MUSIC is the current sound
mode
J CINEMA indicator
Lights when CINEMA is the current sound
mode
K NEWS indicator
Lights when NEWS is the current sound
mode
L STEREO indicator
Lights when STEREO is the current sound
mode
6 Remote control signal sensor (> 9)
7 WIRELESS LINK indicator (> 29)
§1 The indicators will also blink in various conditions. (> 40)
§2 The indicator blinks for 5 sec when the main unit detects an audio format.
To manually verify the current audio format and the corresponding indicators, refer to page 33
(Audio format indicator).
This system (Front)
7
1 2 3
4 5 6
Main unit Active subwoofer
SC-HTB770PPC_RQT9778-1P_mst.book Page 7 Tuesday, January 29, 2013 11:33 AM