ALESIS QS8.1 - Manual (Page 175)

Part 9: Extras
QS7.1/QS8.1 Reference Manual 161
L OADING A B ANK FROM AN E XTERNAL C ARD
The QS can access Program and Mix data directly from a card by using the [BANK]
buttons. However, there may be an instance where you want to load a full bank from
a RAM card into the User bank.
WARNING! This procedure will overwrite the entire contents of your User bank.
There is no Undo function! So be sure this is really what you want to do.
To overwrite the User bank with a Card bank, use this procedure:
❿ Insert the card into the card slot on the back panel.
❡ Press [STORE].
① Press [ PAGE] twice.
This selects the “LOAD FROM CARD” option. The display will look like this:
➃ Use the [CONTROLLER D] slider or the [VALUE] buttons to select the bank on
the card you wish to load (A1–A4, etc.).
➄ Press [STORE] to transfer the data from the card into the QS.