How “2 reverbs” is arranged – ALESIS QS8.1 User Manual
Page 79
Part 6: Editing Effects
QS7.1/QS8.1 Reference Manual
73
HOW “2 REVERBS” IS ARRANGED
As you can see by glancing at the diagram, this Configuration differs considerably
from the first! Here there are a single Delay, two Pitch effects, and two independent
Reverb effects, arranged as follows:
•
Send 1 is routed through a mono Delay, then a stereo Pitch effect, and finally a
stereo Reverb effect.
•
Send 2 has no effects of its own, but can be routed to the same Reverb effect as
send 1 (if you wish).
•
Send 3 is routed through a mono Pitch effect and then its own stereo Reverb
effect.
•
Send 4 has no effects of its own, but can be routed to the same Reverb effect as
send 3 (thus echoing the relationship that Send 2 has with Send 1).
•
The Delay, Pitch and Reverb outputs of Send 1 can be routed to the Mix control
either singly or in any combination; while Send 2 is routed to the Mix only
through the Reverb.
•
Send 3 and Send 4 can be routed to their own separate Mix, but only through the
second Reverb effect.