ADC H2TU-C-388 - Manual (Page 21)

152-388-100-02, Issue 2 Provisioning
H2TU-C-388 List 1 June 6, 2000 13
P
ROVISIONING
T
ASKS
After the HiGain Line Unit is successfully installed, perform these basic provisioning tasks:
1 Set the date and time (see “Setting Date and Time” on this page)
2 Set the circuit ID numbers (see “Setting Circuit ID Numbers” on page 14 )
3 Make any necessary configuration changes (see “Configuring the System” on page 15 )
4 Clear history, alarm, and event log screens to remove miscellaneous data during startup (see “Clearing the
History, Alarm, and Event Log Screens” on page 21 )
Setting Date and Time
Figure 4. Configuration Menu - Date and Time
1 Type to select the Config menu.
2 Select Date and Time, then press .
3 Enter the date in the format indicated, then press .
4 Enter the time in the format indicated (entering seconds is optional), then press .
Monitor Performance Event Log Config Inventory Rlogon Help
+----------------------+
| Standard Options ->
|
| PairGain Options -> |
| Date and Time -> |
+-------------------------------+
| Date (mm/dd/yyyy):
04/15/2000 |
| Time (hh:mm[:ss]): 12:30:01 |
+-------------------------------+
ID: xxxx--xxxx--xxxx--xxxx 04/15/00 12:30:01 H2TU-C System: OK
C
ENTER
ENTER
ENTER