Network settings – AltiGen comm IP 710 User Manual

Page 29

Advertising
background image

IP 710 Manual

21

Network Settings

Boot
Download

System >

Boot Download

After firmware image upgrade, this
setting changes to No. Used mainly
for upgrading or troubleshooting. On
the next boot, the IP phone will
download the new firmware from the
TFTP server, if set to Yes.

Emergency
Number

System >

Emergency Num

Sets the IP phone’s emergency
number. For the U.S., the emergency
number is 911.

Emergency
Gateway

System >

Emergency GW

Sets the IP phone’s emergency
gateway IP address

Version
Information

System >

Version Info

[Read only]

Displays the version number of the
IP phone.

Setting

Menu Path

Description

Enable DHCP

Network >

Enable DHCP

Sets whether Dynamic Host
Configuration Protocol (DHCP) is
being used by the IP phone to retrieve
a new IP address upon boot up.

Local
Address

Network >

Local Address

Sets the IP phone’s local address;
shows only if DHCP is disabled.

Network
Mask

Network >

Network Mask

Sets the IP phone’s network mask;
shows only if DHCP is disabled.

Gateway

Network >

Gateway

Sets the default Gateway IP address.

For H.323 version of phone firmware only:

Enable
GateKeeper

Network >

Enable GK

Sets whether GateKeeper is enabled
or disabled.

Advertising