Acnodes FPC 8084 - Manual (Page 22)

FPC 8084 User s Manual
The RS-422/485 pin assignments for COM2 are listed below.
Signal Name
Pin #
R2-422 RS-485
1 TX- DATA-
2 No connector No connector
3 TX+ DATA+
4 No connector No connector
5 RX+ No connector
6 No connector No connector
7 RX- No connector
8 No connector No connector
9 GND GND
10 No connector No connector
2.5 VGA
The FPC 8084 has an analog RGB interface connector. It is able to
connect to an expansion CRT monitor, and the system can display on
both the flat panel and the CRT simultaneously.
2.6 Ethernet
Ethernet PJ-45 Connector: LAN1
The FPC 8084 is equipped with a high performance Plug and Play
Ethernet interface which is fully compliant with the IEEE 802.3
standard, and consisting of a RJ-45 connector LAN
3 . 4.15.1 Pin Assignment
LAN1: RJ-45 Connector Pin Assignment
Pin Signal
1 Tx+ (Data transmission positive
2
Tx- (Data transmissionnegative)
3 Rx+(Data reception positive)
20