Acnodes FPC 8084 - Manual (Page 55)

FPC 8084 User s Manual
A.2.5 Power Management Setup
The Power Management Setup is to save energy of the system
effectively. It will shut down the hard disk and turn OFF video display
after a period of inactivity.
Phoe nix – Award BIOS CMOS Setup Utility
Pow er Management Setup
ACPI Function Disabled Item Help
Power Management Press Enter
PM Control by APM Yes Menu Level f
Video Off Option Suspend -> Off
Video Off Method V/H SYNC+Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant-Off
Wake Up Events Press Enter
ЗИЖЕ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F 1:
General Help
F5: Previous Values F 6: F ail-Safe Defaults F7 : Optimized Defaults
ACPI Function
This item is to enable/disable the Advanced Configuration and Power
Interface (ACPI).
The choice: Enabled, Disabled.
Power Management
This item is to select the Power Management mode.
The choice: User Define, Min Saving, Max Saving.
PM Control by APM
When enabled, an Advanced Power Management device will be
activated to enhance the Max. Power Saving mode and stop the CPU
internal clock. If Advance Power Management (APM) is installed on the
system, selecting
Yes gives better power savings. If the Max. Power
Saving is not enabled, this will be preset to No .
53