Safety precautions – Acnodes FPC 8084 User Manual

Page 4

Advertising
background image

Safety Precautions

Before getting started, read the following important cautions.

1. The FPC 8084 does not come equipped with an

operating system. An operating system must be loaded
first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist
strap and place all electronic components in any
static-shielded devices. Most electronic components are
sensitive to static electrical charge.

3. Disconnect

the power cord from the F P C 8 0 8 4 T

before making any installation. Be sure both the system
and the external devices are turned OFF. Sudden surge
of power could

ruin

sensitivecomponents.

Make

sure the FPC 8084 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the
application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner
directly onto the screen. The FPC 8084 may come with
or w/o a touchscreen. Although the touchscreen is
chemical resistant, it is recommended that you spray the
liquid cleaner on a cloth first before wiping the screen. In
case your system comes without the touchscreen, you
must follow the same procedure and not spray any
cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or
internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the FP C 808 4, make sure it
is securely installed.

iv

Advertising