Panasonic TH-65PF10RK - Manual (Page 21)

0
Normal Normalise
Auto Setup
Pos. /Size
V-Pos
0 H-Pos
V-Size
Dot Clock
H-Size
Clock Phase
1:1 Pixel Mode Off
0
0
0
0
0
0
0
Normal Normalise
Pos. /Size
V-Pos
H-Pos
0 V-Size
H-Size
1:1 Pixel Mode Off
Auto Setup
21
Adjusting Pos. /Size
1
Press to display the Pos. /Size menu.
Press to select Auto Setup / H-Pos / H-Size / V-Pos /
V-Size / Dot Clock / Clock Phase / 1:1 Pixel Mode.
Press to adjust Pos. / Size.
Press to exit from adjust mode.
3
2
Notes:
• Unadjustable items are grayed out.
Adjustable items differ depending on the input signal and the display mode.
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p ·
24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital
signals are memorized for each frequency.)
• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be
controlled by the Picture Pos./Size function.
• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the
adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
4
During “Video (S Video)”, “Digital”,
“SDI” and “HDMI” input signal.
During “Component”, “RGB” and
“PC” input signal.
While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)