Panasonic TH-65PF10RK - Manual (Page 40)

Off
Portrait Setup
Seam hides video Off
1
Off AI-synchronization
Viewing Area
Location 16 : 9
Portrait Setup
Off
Portrait Setup
Seam hides video Off
1
Off AI-synchronization
Viewing Area
Location 16 : 9
Portrait Setup
40
Set up for Portrait
Press twice to exit from Setup.
7
Press to select AI-synchronization.
Press to select “Off” , “On”.
Adjust to equalize the brightness of the 3 displays when using Portrait setting.
The brightness depends
on each display’s setting.
Equalize the brightness
of all the displays.
Off On
Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial
values.
Picture menu: Colour, Hue
6
AI-synchronization
Viewing Area / Location
Press to select Viewing Area or Location.
Press to select each functions.
Notes:
• When the input signal is 16:9, Viewing Area is fi xed to “16:9”.
• When “Viewing Area” is “16:9”, the aspect mode is set to “16:9”.
5
Viewing Area: Set a mode of image division for Portrait function.
Location: Set a location of image to be displayed for Portrait function.
When Portrait Setup is “On”:
Display the image of the selected location. When Portrait Setup is “Off”:
Represent an area of the selected Location at a normal
brightness and darken the rest of it.
Location setting
Viewing Area and Location
The mode of image division and the Location by setting of Viewing Area is as follows.
Location 1 Location 2 Location 3
Location 1 Location 2 Location 3
Viewing Area : 4:3
Suitable to display 16:9 images. 4:3 images
extend transversely.
Both right and left sides of the image are
cut by 48 dots.
Viewing Area : 16:9
4:3 images are displayed without changing
aspect ratio.
Although the images of each Location
overlap, you can adjust Pos. / Size to display
the image normally. (see page 21)
Undisplayed area (48 dots)