Acroprint timeQplus TQ600 - Manual (Page 24)

- 16 -
Enrolling Users – Fingerprint Terminals
After configuring the TQ600 you are ready to enroll users. If
there are no users on the system all users will have a privilege level
of supervisor, if an administrator (Admin) is enrolled on the system
they will be the only one allowed to enroll a new user.
The TQ600 provides three ways to enroll, Fingerprint Enrollment,
Password Enrollment, or Fingerprint with Password Enrollment.
Fingerprint Enrollment is preferable for personnel with good
fingerprint definition; Fingerprint with Password is preferable for
users that have difficulty verifying their finger print. Password
Enrollment is necessary for users whose fingerprints are too worn
or damaged for the terminal to read their fingerprint.
To start the enrollment process, identify yourself. Press [MENU],
enter your ID number or fingerprint, and verify your identity.
Note: If this is the first enrollment in a new or empty system,
you will not be prompted for verification.