Testing a fingerprint enrollment, Enrolling auxiliary fingerprints – Acroprint timeQplus TQ600 User Manual
Page 27
- 19 -
Testing a Fingerprint Enrollment
Ask the user to place their finger on the fingerprint sensor. If the
test was successful the enrollment is complete. If the terminal
cannot read the fingerprint or if several attempts are required for
the terminal to verify the fingerprint, the user should try 1:1
verification (refer to page 25).
Enrolling Auxiliary Fingerprints
It is a good practice to enroll at least two fingers for each user.
Press [MENU], select “User Manage”, press [OK], select “Enroll
User”, press [OK], select “Enroll FP”, press [OK], the following
appears:
Press [ESC] to cancel the new enrollment, enter the User ID (PIN
number) of the user you wish to enroll an additional fingerprint for:
Backup Enroll
User ID 00001
ESC OK
Enroll FP
New Enroll?
ESC OK