Acroprint timeQplus TQ600 - Manual (Page 51)

- 43 -
„ Match Thr: Set the fingerprint match threshold level. The
threshold value can be set 0 – 75 (default is 35). See Table
1-1.
„ Mst Input ID: Turns 1:1 (one to one) fingerprint verification
on or off.
„ 1:1 Thr: The minimum fingerprint read correlation needed to
achieve a positive match for 1:1 verification.
„ Voice: Set the voice prompts on or off.
„ Upd Firmware: The user cannot update the firmware
unless this feature has been enabled by an authorized
dealer.
„ Work Code: Not available at this time.
„ Adj VOL(%): Adjust the volume level (0-99); “0” turns off
the speaker.