ATEN ATEN MasterView CS-1732A - Manual (Page 19)

Chapter 3.
Hotkey Operation
The CS-1732 A / CS-1734 A provides an extensive, easy-to-use, hotkey function that
makes it convenient to control and configure your KVM installation from the keyboard.
Hotkeys provide asynchronous (independent) switching of the KVM, USB hub and
audio focus. If you wish, you can give one computer the KVM console focus, another
the USB hub focus, while a third has the audio focus.
Port Switching
All port switches begin with tapping the Scroll Lock key twice. The tables below
describe the actions that each combination performs.
Note: If using the Scroll Lock key conflicts with other programs running on the
computer, the Ctrl key can be used, instead. See p. 16 for details.
Cycling Through the Ports
Hotkey Action
[Scroll Lock] [Scroll Lock]
[Enter] Brings the KVM, USB hub, and audio focus from the
port that currently has the KVM focus to the next port
on the installation (1 to 2; 2 to 1 for the CS-1732
A ; 1
to 2; 2 to 3; 3 to 4; 4 to 1 for the CS-1734 A ).
Note that the KVM, USB hub, and audio focus all go
to this port even if they were on different ports to
begin with.
[Scroll Lock] [Scroll Lock] [K]
[Enter] Brings only the KVM focus from the port that currently
has it to the next port on the installation. The USB
hub and audio focus remain where they are.
[Scroll Lock] [Scroll Lock] [U]
[Enter] Brings only the USB hub focus from the port that
currently has it to the next port on the installation. The
KVM and audio focus remain where they are.
[Scroll Lock] [Scroll Lock] [S]
[Enter] Brings only the audio focus from the port that
currently has it to the next port on the installation. The
KVM and USB hub focus remain where they are.
2005-12-21
13