ATEN ATEN MasterView CS-1732A - Manual (Page 9)

Hardware Requirements
Console
w
A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will
be using on any computer in the installation.
w
A USB style mouse
w
A USB style keyboard
Computer
The following equipment must be installed on each computer:
w
A VGA, SVGA or Multisync card.
w
Type A USB port, or PS/2 keyboard and mouse ports.
Cables
Only CS Custom cable sets specifically designed to work with this switch may be used
to link to the computers. Two (CS-1732
A ) or four (CS-1734 A ) 1.2m 4-in-1 cable sets are
provided with this package. They use the USB to transfer the keyboard and mouse input
from your console to the computer.
The switches also support computers that use PS/2 connectors to transfer keyboard and
mouse data. Cable sets with PS/2 connectors, as well as longer cable sets are also available:
Connector Cable Length Part Number
USB 1.2m 2L-5301U
USB 1.8m 2L-5302U
PS/2 1.2m 2L-5301P
PS/2 1.8m 2L-5302P
Note: The CS-1732 A / CS-1734 A ‘s USB hub function only works with USB cable
set connections. It will not work with PS/2 cable set connections.
For additional cables, contact your dealer.
2005-12-21
Introduction
3