ATEN ATEN MasterView CS-1732A - Manual (Page 30)

6. Power the switch back on by plugging in one of the KVM cables. The switch’s front
panel LEDs flash to indicate that it is in Firmware Upgrade Mode.
Starting the Upgrade
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double clicking the
file icon, or by opening a command line and entering the full path to it.
The Firmware Upgrade Utility Welcome screen appears:
Note: The screenshots in this section are for example purposes. The screens that
appear during your firmware upgrade may vary slightly as to their wording
and descriptions.
2. Read and Agree to the License Agreement (enable the I Agree radio button).
2005-12-21
CS-1732 A / CS-1734 A User Manual
24