Alpine NVD-A802 - Manual (Page 43)

40
-EN
ALPINE NVD-A802 68-06194Z86-A (EN)
4
Touch the desired Exit.
Select (highlight) the desired exit and press
ENTER.
a Exit Name
b Freeway No.
The Freeway Exit Information is displayed.
5
Touch the desired POI.
The Confirm as Waypoint screen is displayed.
6
Touch [OK to Proceed].
Select (highlight) “OK to Proceed” by tilting the
joystick and press ENTER.
The system begins calculating a new route.
• Selecting “Map” will display a selected POI
surrounding map.
Auto Reroute
When you are driving to the destination following Route
Guidance, if you deviate from the route, the system will
automatically calculate a new route.
Detour
You can calculate a new route from your current position around
an approaching detour on the current route. If there is a
construction site ahead, for example, search for a detour by
estimating the distance from your current position to the site.
1
Touch [ ].
The route sub menu is displayed.
• If operation is performed using the remote control, go
to step 2.
2
Touch [DETOUR].
Press DETOUR.
3 3
Select the estimated distance of the detour.
Touch [1/2mi], [1mi], [2mi] or [5mi].
Tilt the joystick to select “1/2mi,” “1mi,” “2mi” or
“5mi” and press ENTER.
The system begins calculating a new route.
• If the route is longer than 30 miles, you can select a
detour distance of up to 30 miles.
a b