EXONIC EXD 7088GPS2 - Manual (Page 44)

40
Positioning information:
1. Date: the date of a fixed GPS position, e.g. 01-03;
2. Time: the time (always shown as GMT) of a GPS position fix, e.g. 14:03:37
3. Vehicle speed: the speed of a GPS position fix.
4. Altitude: the altitude of a GPS position fix.
5. HDOP: 60.0
6. Number of Satellites: 4
7. Longitude: the longitude of a GPS-fixed position, e.g. 121°27’1E
8. Latitude: the latitude of a GPS-fixed position, e.g. 31°16’44S;
6.8 Volume
◎ tap “ ” in “Free Navi Map” screen or “Route Navi Map"
(Picture 6.3) to enter the “Volume” screen (Picture 6.16).
◎ tap to adjust volume to lower while tap to make
volume be louder.
◎ tap to make the
system be mute.
Once you have configured the settings, tap “OK” and the system
will save your settings and return to the “Settings” screen.
6.9 Measure Unit
Tapping this option will change the units of distance; this change will be reflected both on the map and in the voice
directions. Tap this option to change between Miles and Kilometers. The currently selected option will be shown on the
screen.
◎ If you see , current measure unit is Kilometer;
tap to switch mile and vice versa.
Picture 6.16 Volume
Picture 6.17 Settings
Note: In order to navigate you require that the unit is locked to 4 or more satellites and is referred to as a 3D fix.