ADC MM701G2 - Manual (Page 56)

Chapter 5: Configuring System Parameters April 14, 2006
5-14 MM70xG2-UM-03
R EBOOTING THE M ODEM
Before rebooting the modem, save any configuration changes you have made using the steps in “Saving Changes”
on page 5-12 .
Step Action
1 Select Reboot on the menu bar to access the Reboot page.
Figure 5-14. Reboot
2 Do one of the following:
a. Click Yes to reboot the modem.
b. Click No to cancel the rebooting process.
Note: Refer to “Rebooting the Modem with the Reset Button” on page 1-6 for detailed information about
rebooting the modem by pressing the Reset button located on the back panel.
Note: Refer to “Reset to Factory Defaults” on page 9-12 for detailed information about resetting the modem
to return it to its original factory values (or defaults).