HOUNO BM ovens - Manual (Page 8)

8
(15) Exhaust
Open and close the exhaust from the oven chamber by pressing . When the control
lamp is on, the exhaust is open; when the control lamp is off, the exhaust is closed.
The exhaust can be opened and closed during a program. For further information on whether
the exhaust should be open or closed, see section on baking or contact your bread supplier.
Note that on the 2/3 models, the exhaust is manually operated.
(16) Manual operation
When the oven is set to the memory function , you can change to manual operation by
pressing provided that the oven is not on.
The control lamp in lights when the oven is set to manual operation.
(17) ON/OFF operating mode
Start and stop the operating mode by pressing (17).
(18) Fan speed
The fan can be set at two speeds:
•
HIGH (upper control lamp is on)
•
LOW (lower control lamp is on)
The fan speed will usually be high but can be changed during the program. For instructions on
the use of high and low fan speed, see section on baking, p. 10.
Note that the 2/3 models have only one fan speed.
(19) Main switch
Switch the oven on and off by pressing . When the oven is switched on, all displays
and control lamps will light up for a moment, which means that all functions are being tested
before start-up.
(20) Manual humidity pulsing
Humidity/steam is added to the oven chamber as long as the key is activated.